GASKET SHEET GAMBIT AF-OIL
MATERIAL
Gasket sheet GAMBIT AF-OIL is based on Kevlar® aramide fibres, mineral fibres, and fillers bound with NBR rubber-based binder.
Designation according to DIN 28091-2: FA-AM1-O
Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.
General properties and applications
Oil-resistant gasket sheet, recommended for high temperatures and pressures. Designated for application in supervised joints. Suitable for natural gas and drinking water installations. Also recommended for applications with water, steam, kerosene, fuels, oils, brine, natural gas, propane-butane.
| Dimensions | |||
|---|---|---|---|
| Standard thicknesses of sheets | mm | 0.3 , 0.5 , 0.8 , 1.0 | ±0.1 |
| 1.5 , 2 , 2.5 , 3 , 4 , 5 | ±10% | ||
| 6 | ±10% | ||
| Standard dimensions of sheets | mm | 1500×1500 | ±10 |
| Maximum working conditions | ||
|---|---|---|
| Peak temperature | ⁰C | 350 |
| Temperature under continuous operation | ⁰C | 300 |
| Temperature under continuous operation with steam | ⁰C | 230 |
| Temperatura minimalna | ⁰C | -60 |
| Pressure | Mpa | 10 |
| Physical and chemical properties | ||||
|---|---|---|---|---|
| FA-AMZ-O | DIN 28091-2 | |||
| Density | ±5% | g/cm3 | 2 | DIN 28090-2 |
| Transverse tensile strength | min | Mpa | 9 | DIN 52910 |
| Compressibility | min | % | 10 | ASTM F36 |
| Elastic recovery | min | % | 55 | ASTM F36 |
| Residual stresses 50 MPa/16 h/300 °C/ | min | Mpa | 29 | DIN 52913 |
| Residual stresses 50 MPa/16 h/175 °C/ | min | Mpa | 35 | DIN 52913 |
| INCREASE IN THICKNESS | ||||
| Oil IRM 903 150 °C/5 h | max | % | 6 | ASTM F146 |
| Model fuel B 20 °C/5 h | max | % | 6 | ASTM F146 |
| Kerosene 20 °C/24 h | max | % | 5 | ASTM F146 |
| Colour Green | ||||
