GASKET SHEET GAMBIT AF-200G
MATERIAL
Gasket sheet GAMBIT AF-200G is based on Kevlar® aramide fibres, mineral fibres, and fillers bound with NBR rubber-based binder
Designation according to DIN 28091-2: FA-AM1-O
Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.
General properties and applications
High parameter sheet, containing special combination of aramide fi bres and graphite. The sheet features high elasticity. Recommended for applications with steam. Water, fuel, and oil resistant, among others.
| Dimensions | |||
|---|---|---|---|
| Standard thicknesses of sheets | mm | 0.3 , 0.5 , 0.8 , 1.0 | ±0.1 |
| 1.5 , 2 , 2.5 , 3 , 4 , 5 | ±10% | ||
| 6 | ±10% | ||
| Standard dimensions of sheets | mm | 1500×1500 | ±10 |
| Maximum working conditions | ||
|---|---|---|
| Tetmperatura chwilowa | ⁰C | 380 |
| Temperature under continuous operation | ⁰C | 320 |
| Temperature under continuous operation with steam | ⁰C | 250 |
| Pressure | Mpa | 8 |
| Physical and chemical properties | ||||
|---|---|---|---|---|
| FA-AMZ-O | DIN 28091-2 | |||
| Density | ±5% | g/cm3 | 1.9 | DIN 28090-2 |
| Transverse tensile strength | min | Mpa | 9 | DIN 52910 |
| Compressibility | min | % | 10 | ASTM F36 |
| Elastic recovery | min | % | 50 | ASTM F36 |
| Residual stresses 50 MPa/16 h/300 °C/ | min | Mpa | 25 | DIN 52913 |
| Residual stresses 50 MPa/16 h/175 °C/ | min | Mpa | 30 | DIN 52913 |
| INCREASE IN THICKNESS | ||||
| Oil IRM 903 150 °C/5 h | max | % | 5 | ASTM F146 |
| Model fuel B 20 °C/5 h | max | % | 6 | ASTM F146 |
| Colour Graphite | ||||
